New Holland WorkMaster 50 Service Manual page 168

12. Remove the cluster gear shaft (1) from the ball bear-
ing.
13. Remove the ball bearing (2) from the cluster gear shaft
(1).
14. Remove the external circlip (1) from the groove of the
input shaft.
15. Remove the shuttle coupler gear assembly from the
input shaft.
16. Remove the external retaining ring (1) from the groove
of coupler shuttle gear (2).
17. Remove the ball bearing (3) inside the coupler shuttle
gear (2).
18. Remove the snap ring (1) from the groove of the input
shaft.
Transmission - Gearbox internal components
47866583_ 02/12/2015
21.4 [21.145] / 5
8
GNIL14TR04203AB
9
GNIL14TR04204AB
10
GNIL14TR04205AB
11
GNIL14TR04206AB