Software Installation Procedure; Software Files On The Software Cd-Rom; Software Files On The 3Com Web Site - 3Com CoreBuilder 2500 Software Installation And Release Notes

Software
Installation
Procedure
Software Files on the
Software CD-ROM
Filter Builder
Software Files on the
3Com Web Site
Use this section in either of these cases:
If these Intelligent Switching version 8.1.2 release notes are included
in your system packaging, then version 8.1.2 is already installed on
your system. Use this "Software Installation Procedure" section and
the Software CD-ROM only if you need to reinstall the software later.
If you are upgrading an existing system to Intelligent Switching
software version 8.1.2, read through this entire "Software Installation
Procedure" section at least once before you start the installation
process.
Intelligent Switching software version 8.1.2 includes the following
directory and file structure:
Mib_defs
baseMibs
hpov
mosy
smic
snm
Software
lp2500c
lpexpand
lpx2000s
The Software CD-ROM also includes the Filter Builder utility, which you
can use to develop and test packet filters for the CoreBuilder 2500
system. You load Filter Builder software on a PC, not on the system. See
the LAN Switching Tools Filter Builder Getting Started Guide on the
Documentation CD-ROM for more information about installing and using
Filter Builder.
You can also obtain Intelligent Switching software version 8.1.2 from the
3Com Web site. For easy downloading, all software files are compressed
into one file. To locate this file, begin from the following URL:
http://support.3com.com/software/switches.htm

Software Installation Procedure

15