Managing The Ayer Odule; Module; Management Methods; Accessing The Web Interface - 3Com SuperStack II 3300 User Manual

4
Management
Methods
Accessing the Web
Interface
M
ANAGING THE
M
ODULE
This chapter contains the following information:

Management Methods

Accessing the Web Interface

Accessing the User Interface
Levels of User Access
The terms system and module are used interchangeably in the command
line and the Web interface.
You can manage the Layer 3 Module in the following ways:
Using the Web interface.
Using the command line interface (Telnet).
Using the 3Com
your network management documentation for details.
Depending on the tasks you need to carry out, there are different levels of
access, described in "Levels of User Access" on page 39.
To access the Web interface over the network:
1 Make sure that your network is correctly set up for management using
the Web interface. You must have configured at least one IP address on
your Layer 3 Module (see "Essential Configuration" on page 30).
2 Open your Web browser. The Web management suite of applications
requires one of the following:
Internet Explorer 4.0 or later
L
AYER
® Transcend ® Network Control Services software. See
3