Network - NetComm 3G42W-M User Manual

10.3 3G Network
Select this option for detailed status information on your Routers 3G connection
Status
Manufacturer
Model
FW Rev
IMEI
FSN
IMSI
HW Rev.
Temperature
System Mode
WCDMA band
WCDMA channel
GSM channel
GMM (PS) state
MM (CS) state
Signal Strength 1
Signal Strength 2
HSPA+ 42Mbps WiFi Router User Guide
44
Description
The manufacturer of the embedded 3G module.
The model name of the embedded 3G module
The firmware version of the 3G module.
The IMEI (International Mobile Equipment Identity) is a 15 digit number that is used to identify a mobile device
on a network.
Factory Serial Number of the 3G module.
The IMSI (International Mobile Subscriber Identity) is a unique 15-digit number used to identify an individual
user on a GSM or UMTS network.
The hardware version of the 3G module.
The temperature of the 3G module in degrees Celsius.
WCDMA/Europe CDMA 2000 / America
The 3G radio frequency band which supports tri-band UTMS/HSDPA/HSUPA frequencies (850/1900/2100
MHz), IMT2000 is 2100 MHz, WCDMA800 is 850 MHz, WCDMA1900 is 1900 MHz.
The 3G channel.
The 2G channel.
Packet Switching state
Circuit Switching state
The 3G/2G service signal strength in dBm.
The 3G/2G service signal strength in dBm.
YML42
www.netcomm.com.au