Chapter 3: Internet Access
This chapter describes the procedures necessary to configure the basic functions and to start up
your NetComm Cable/DSL Firewall Router. On successful completion of these procedures, you
will be able to access the Internet via your NetComm Cable/DSL Firewall Router.
3-1 Prepare your network information
In order to allow a quick reference point when setting up your NetComm Cable/DSL Firewall
Router, it is suggested you complete the table below with the necessary information, which
should be supplied by your ISP:
Provided by some ISPs (
Host Name:
Domain Name:
IP address given by ISP:
Obtain IP Address automatically, or
Static IP
IP Address (if static):
Subnet Mask:
Default Gateway:
DNS Server Primary:
DNS Server Secondary (optional):
DNS Server Third (optional):
PPP authentication:
PPPoE
PPTP
User Name:
Password:
www.netcomm.com.au
Page 18
tick indicates common minimal requirements)
______________________________________
______________________________________
_________._________._________._________
_________._________._________._________
_________._________._________._________
_________._________._________._________
_________._________._________._________
_________._________._________._________
______________________________________
______________________________________
Rev.2 - YML630
Cable/DSL Firewall Router