Remote Firmware Upgrade - NetComm NTC-6908 User Manual

Re emote Firm mware Upg
The remote firmware upd date process has two
1. Upload and install l the system recovery
2. Upload and install l the main system ima
Note: Do not interrupt the pow
performed d.
The first step is to upload d and install the syste
file is s located on your com mputer.
Onc e you have selected the recovery image f
statu us bar reaches 100% % and the "Phase:" ha
Whe en the upload has com mpleted, the screen
Onc e you see "Done" sh own as per the scree
The second step is to up pload and install the m
com puter
NTC C-6000 Series – Indus strial M2M Wireless R
64
www w.netcommwireless.c com
rade
o steps:
y image to the router .
age to the router.
wer during a remote fi rmware upgrade, as s this may render the
em recovery image o nto the router. You c an do this by clicking
Figure 86: System m ‐ Load/Save ‐ Upl
file to use, click "Uplo oad" to upload the fil le. You will then see a
as changed to Comp lete.
Figure 87: Uploa ading Firmware File
should refresh and li st the file you have ju ust uploaded. Click o
Figure 8 88: Firmware Install
enshot below,
Figure 89: Firmw ware Upgrade Done
main system software e image. Click on the browse button again
Routers
NETCOMM CALLDIRECT™ SERIES – NTC
router unable to star t up and will require a
g on the browse butto on and then to naviga
load Firmware
a progress bar as sh own in the screensho
on the "Install" link to the right of this.
l Link
Message
n and navigate to wh ere the main system
C-6000 Serie s
a local system recov very upload to be
ating to where the re covery image upgrad de
ot below. The upload d has finished when t he
image upgrade file i s located on your
YML6908