Table of Contents
Advertisement
7.5 Wireless Bridge
The following screen appears when selecting Wireless Bridge, and goes into a detailed explanation of how to configure wireless bridge features
of the wireless LAN interface.
Click Apply/Save to implement new configuration settings.
Option
AP Mode
Bridge Restrict
7.6 Station Info
The following screen appears when you select Station Info, and shows authenticated wireless stations and their status.
Click the Refresh button to update the list of stations in the WLAN.
Option
MAC
Associated
Authorized
SSID
Interface
YML42
www.netcomm.com.au
Description
Selecting Wireless Bridge (Wireless Distribution System) disables Access Point (AP)
functionality while selecting Access Point enables AP functionality. In Access Point mode,
wireless bridge functionality will still be available and wireless stations will be able to
associate to the AP.
Selecting Disabled in Bridge Restrict disables Wireless Bridge restriction, which means
that any wireless bridge will be granted access. Selecting Enabled or Enabled (Scan) allows
wireless bridge restriction. Only those bridges selected in Remote Bridges will be granted
access. Click Refresh to update the station list when Bridge Restrict is enabled.
Description
The MAC address of any connected client
Lists all the stations that are associated with the Access Point, along with the amount of
time since packets were transferred to and from each station. If a station is idle for too
long, it is removed from this list.
Lists those devices with authorized access.
The SSID of your wireless network
The wireless interface being used to connect
NETCOMM LIBERTY™ SERIES - HSPA+ 42Mbps WiFi Router
HSPA+ 42Mbps WiFi Router User Guide
25
Advertisement
Table of Contents
