Led Indicators - NetComm NTC-6200 Series User Manual

LED indicators

The NTC-6200 Series router uses 8 LEDs to display the current system and connection status.
LED ICON
1
The term "blinking" means that the LED may pulse, with the intervals that the LED is on and off not being equal. The term "flashing" means that the
LED turns on and off at equal intervals.
2
GPS not available on NTC-6200-03 and NTC-6200-13.
www.netcommwireless.com
Figure 2 - NTC-6200 Series router LED Indicators
NAME COLOUR
Off
Double flash
Power
On
On
Slow flashing
On
Blinking
Slow flashing
On
Network
Slow flashing
Slow flashing
Fast flashing
On
Off
On
2
GPS /
Customizable
LED Indicator
Slow flashing
On
On
Signal
On
strength
On
Table 3 - LED Indicators
STATE DESCRIPTION
Power off
Powering up
Power on
Power on in recovery mode
Hardware error
Connected via WWAN
1
Traffic via WWAN
Connecting PDP
Registered network
Registering network
SIM PIN locked
SIM PUK locked
Can't connect
GPS function disabled
GPS function is enabled but no
satellite is detected.
Satellite detected, acquiring
location.
Satellite detected, location
acquired.
3G
2G GPRS
GSM only (no GPRS)
NetComm Wireless 3G M2M Router / Plus
9