Gps Led Indicators - NetComm NTC-223 User Manual Appendix

GPS LED indicators

The NTC-223 router uses eight LEDs to display the current system and connection status.
One of the LED lights is dedicated to GPS or can be customised for use by some of the other functions of the
NTC-223.
When a Navisys GR-701U GPS Receiver antenna is connected to the Micro USB port the LED indicator will
indicate the following GPS activity:
L E D
LED Indicator
Note – The term "blinking" means that the LED may pulse, with the intervals that the LED is on and off not being equal.
Optional GPS functionality on NTC-223 – User Guide Appendix
UG01192 v1.0 20 August 2019
Figure 2 – NTC-223 GPS/Customizable LED indicator
N A M E C O L O U R
GPS
Table 1 – GPS LED indicators
The term "flashing" means that the LED turns on and off at equal intervals.
S T A T E
Off GPS function disabled
GPS function is enabled but no
On
satellite is detected.
Slow flashing Satellite detected, acquiring location.
On Satellite detected, location acquired.
D E S C R I P T I O N
© NetComm Wireless 2019
5 of 13