Advanced Configuration - NetComm NTC-6200 Series User Manual

Advanced configuration

The NTC-6200 Series router comes with pre-configured settings that should suit most customers. For advanced configuration, log
in to the web-based user interface of the router.
To log in to the web-based user interface:
1. Open a web browser (e.g. Internet Explorer, Firefox, Safari), type
The web-based user interface log in screen is displayed.
2. Enter the login username and password. If this is the first time you are logging in or you have not previously configured the
password for the "root" or "admin" accounts, you can use one of the default account details to log in.
Note: To access all features of the router, you must use the root manager account.
For security reasons, we highly recommend that you change the passwords for the root and admin accounts upon initial
installation. You can do so by navigating to the System and then Administration page.
The Status page is displayed when you have successfully logged in.
www.netcommwireless.com
Figure 15 – Log in prompt for the web-based user interface
ROOT MANAGER
ACCOUNT
Username: root
Password: admin
Table 12 - Management account login details – Root manager
ADMIN MANAGER ACCOUNT
Username: admin
Password: admin
Table 13 - Management account login details – Admin manager
http://192.168.1.1 into the address bar and press Enter.
NetComm Wireless 3G M2M Router / Plus
19