Creating/Updating View Information Or Deleting A View; Setting The Size Of Snmp Packet Sent/Received By An Agent; Enabling/Disabling A Port Transmitting Trap Information Snmp Agent; Disabling Snmp Agent - 3Com Switch 4500 26-Port Configuration Manual

284 C 16: SNMP C
HAPTER
Creating/Updating View
Information or Deleting
a View
Setting the Size of SNMP
Packet Sent/Received by
an Agent
Enabling/Disabling a
Port Transmitting Trap
Information SNMP
Agent

Disabling SNMP Agent

Displaying and
Debugging SNMP
ONFIGURATION
You can use the following commands to create, update the information of views
or delete a view.
Perform the following configuration in System View.
Table 324 Create/Update View Information or Deleting a View
Operation
Create/Update view information
Delete a view
You can use the following commands to set the size of SNMP packet sent/received
by an agent.
Perform the following configuration in System View.
Table 325 Set the Size of SNMP Packet sent/received by an Agent
Operation
Set the size of SNMP packet sent/received
by an agent
Restore the default size of SNMP packet
sent/received by an agent
The agent can receive/send the SNMP packets of the sizes ranging from 484 to
17940, measured in bytes. By default, the size of SNMP packet is 1500 bytes.
To enable/disable a port transmitting trap information SNMP Agent. Perform the
following configuration in Ethernet Port View.
Table 326 Enable/Disable a Port Transmitting Trap Information SNMP Agent
Operation
enable current port to transmit the trap information enable snmp trap updown
disable current port to transmit the trap information undo enable snmp trap updown
To disable SNMP Agent perform the following configuration in System View.
Table 327 Disable SNMP Agent
Operation
Disable snmp agent
If user disable NMP Agent, it will be enabled whatever
configured thereafter.
After the above configuration, execute the
display the running of the SNMP configuration, and to verify the effect of the
configuration.
Execute the debugging command in User View to debug SNMP
configuration.
Command
snmp-agent mib-view { included |
excluded } view-name oid-tree
undo snmp-agent mib-view view-name
Command
snmp-agent packet max-size
byte-count
undo snmp-agent packet max-size
Command
Command
undo snmp-agent
snmp-agent
command in all views to
display
command is