Retry; Standby Detect-Group - 3Com Switch 4500 Family Manual

retry

Syntax
retry retry-times
undo retry
View
Detected group view
Parameters
retry-times: Maximum retry times during a detect operation. This argument ranges from 0 to 10 and
defaults to 2.
Description
Use the retry command to set the maximum retry times during a detect operation.
Use the undo retry command to restore the default times.
By default, the maximum retry times during a detect operation is two.
When an Auto Detect-enabled switch detects objects, it sends an ICMP Request to each detected
object. If the switch fails to receive an ICMP Reply from the object within the time waiting for an ICMP
Reply configured with the time wait command, the switch re-sends an ICMP Request until the
maximum retry times configured with the retry command is reached. If still no ICMP Reply is received,
the destination IP address is considered as unreachable.
Examples
# Specify the maximum number of retires to 3 for detected group 10.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] detect-group 10
[Sysname-detect-group-10] retry 3

standby detect-group

Syntax
standby detect-group group-number
undo standby detect-group
View
VLAN interface view
Parameters
group-number: Detected group number ranging from 1 to 25.
Description
Use the standby detect-group command to configure the interface backup function by using the auto
detect function.
1-6