Firmware Version Control - Avaya G250 Administration Manual

Firmware version control

Firmware is the software that runs the Avaya G250/G350 Media Gateway. The Avaya
G250/G350 Media Gateway has two firmware banks:
Bank A
●
Bank B
●
Each firmware bank contains a version of the G250/G350 firmware. These may be different
versions. The purpose of this feature is to provide redundancy of firmware. You can save an old
version of the firmware in case you need to use it later. If it becomes necessary to use the older
version, you can enter set boot bank bank-x and then reset the G250/G350 to use the
older version. This is particularly important when uploading new versions.
For more information on firmware version control, see
page 109.
Firmware version control
Software and firmware upgrades
Issue 5 June 2008
on
37