Firmware Specifications - Avaya G430 Deploying And Upgrading

Before you install
because of unreliable earthing concerns in Finland, Norway, and Sweden, the Branch
Gateway must be installed in a Restricted Access Location (RAL). An RAL is defined as an
access that can be gained only by trained service personnel or customers who have been
instructed about the reasons for the restricted access and any safety precautions that must be
taken. In these cases, access to the Branch Gateway is gained by the use of a tool (such as a
lock and key) or other means of security. If you have any questions about the safety
conditions, contact your project manager. When you have verified that the site is ready for a
safe installation, proceed with the installation.

Firmware Specifications

New Comcode numbers for G430
Old codes will still be active for G430 with imbedded MP20 and MP80 bundle option.
• 700503274 : G430 120 channel DSP daughter board – Single MP120 for upgrades
• 700506957 : G430 MP120 Media Gateway – New bundle no on board MP20 and preinstalled
MP120
• 700506958 : G430 MP120 Media Gateway Non-GSA – New bundle number on board MP20
and preinstalled MP120
• 700508198 : G430 120 CHANNEL DSP daughter board
• 700512173 : G430 V3 40 CHANNEL GSA
• 700512174 : G430 V3 40 CHANNEL NON-GSA
Minimum firmware requirements for G430
Firmware Build
version
BGW 6.1 31.26.
0
BGW 6.2.1 32.26.
0
BGW 6.3 33.13.
0
July 2018
v1a v2a v3
(MP120
Preinstalled)
Yes No No
Yes No No
Yes No No
Deploying and Upgrading Avaya G430 Branch Gateway
Comments on this document? infodev@avaya.com
Comments Recommended CM
Version
- Older versions of CM
will work
No BGW CM 6.0.1
support
(CM blocks more than 105
MP120
channels)
No BGW AA 6.2 FP1 CM 6.2 sp 4 —
support Dec 2012
MP120
(CM blocks more than 105
channels)
No BGW AA 6.2 FP2 CM 6.3 — May
support 2013
MP120
(CM supports all 120
channels)
Table continues...
16