7
MEMory Subsystem
MEMory:CLEar:TABle
This command is used to clear the contents of the table currently selected using
MEMory:TABLe:SELect. Although the table remains, a
MEMory:TABLe:FREQuency|GAIN:POINts? query returns a 0 as the table contents
are empty.
This command is an alternative form of the MEMory:CLEar[:NAME] command. The
difference is the method in which the table is selected.
The contents cleared using this command are non-recoverable.
NOTE
Syntax
Example
MEM:CLE:TABL
Error Message
If no table is selected, error –221, "Settings conflict" occurs.
294
MEM
:CLE
:TABL
This command clears the contents of the
currently selected table.
Keysight N8262A Programming Guide