Table of Contents
Advertisement
Switch Description
The 16-Port/24-Port 1000BASE-T Gigabit Ethernet Switch was designed for easy installation and high
performance in an environment where traffic on the network and the number of users increase continuously.
Features
•
16 or 24 10/100/1000BASE-T Gigabit Ethernet ports.
•
Supports Auto-Negotiation for speed and duplex mode.
•
Supports Auto-MDIX for each port.
•
Full/half duplex transfer mode for 10Mbps and 100Mbps.
•
Full duplex transfer mode for 1000Mbps.
•
Store-and-Forward switching method.
•
IEEE 802.3x flow control for full-duplex mode.
•
Backpressure flow control for half-duplex mode.
•
Integrated address Look-Up Engine, supports 4K absolute MAC addresses.
•
Supports 2M bits data buffer per device.
•
Extensive front-panel diagnostic LEDs.
Front-Panel Components
The front panel of the Switch consists of LED indicators and either 16 or 24 (10/100/1000 Mbps) Gigabit
Ethernet ports.
Comprehensive LED indicators display the status of the Switch and the network.
LED Indicators
The LED indicators of the Switch include Power, Link/Act, 1000Mbps, and 100Mbps. The following shows the
LED indicators for the Switch along with an explanation of each indicator.
D-Link DGS-1016TL/DGS-1024TL Gigabit Ethernet Switch
Figure 1-1A. Front Panel View of the DGS-1016TL
Figure 1-2B. Front Panel View of the DGS-1024TL
2
Advertisement
Table of Contents
