Running Self-Calibration - Keysight Technologies 1000A Series User Manual

6
Oscilloscope Utility Settings
• Connecting to a PictBridge compliant printer.
• Remote programming control of the oscilloscope.
Normally, the USB device port auto-detects the type of host that is connected.
However, if there are auto-detect problems, you can manually choose the type of
host that is (or will be) connected.
To select the USB device port function:
1 In the Preference menu ([Utility] > Preference), press USB Device to toggle

Running Self-Calibration

The automatic calibration routine adjusts the internal circuitry of the oscilloscope
for the best measurement accuracy.
The automatic calibration should be run when the ambient temperature changes
by 5 °C or more.
Before performing the automatic calibration, let the oscilloscope warm-up at least 30
NOTE
minutes.
To run the oscilloscope's self-calibration:
1 Press [Utility].
2 In the Utilities menu, press Sel f-Cal.
3 Follow the instructions on the Calibration screen.
132
between:
Auto Detect Lets the USB device port auto-detect the type of host that is
connected.
Computer Specifies the that the USB device port will be connected to a
computer host.
PictBridge Specifies the that the USB device port will be connected to a
PictBridge compliant printer host.
Keysight 1000A Series Oscilloscopes User's Guide