Calibration Definitions; Installation Of The Calibration Definitions; Equipment Required But Not Supplied; Options - Keysight Technologies 85053B User's And Service Manual

3.5 mm verification kit
Table of Contents

Advertisement

General Information

Incoming Inspection

Calibration Definitions

The 85053B verification kit is intended to be used with the 85033E and 85052B
3.5 mm calibration kits. Prior to performing a calibration with your network
analyzer, the calibration kit must be selected and the calibration definitions for
the devices in the kit installed in the network analyzer. Refer to your PNA Help
system for instructions on selecting the calibration kit and performing a
calibration.

Installation of the Calibration Definitions

The calibration definitions for the kit should be permanently installed in the
internal memory or hard disk of the network analyzer. They may already be
resident within the analyzer, or you can download them from Keysight's
Calibration Kit Definitions Web page at
http://na.support.keysight.com/pna/caldefs/stddefs.html. In addition, the
calibration definitions may be entered manually from the front panel. Refer to
your PNA Help system for instructions.

Equipment Required but Not Supplied

Some items are not supplied with the verification kit but are required to ensure
successful operation of the kit. Refer to
Verification Kit,"

Options

The following option is available for the 85053B verification kit:
Option 910
This option adds an additional copy of the user's and service guide (this
manual).
Incoming Inspection
Verify that the shipment is complete by referring to the contents list in the
shipping container.
Check for damage. The foam-lined storage case provides protection during
shipping. Verify that this case and its contents are not damaged.
If the case or any device appears damaged, or if the shipment is incomplete,
contact Keysight Technologies — see
Keysight will arrange for repair or replacement of incomplete or damaged
shipments without waiting for a settlement from the transportation company.
Refer to
1-2
for a list of these items and for ordering information.
"Returning a Kit or Device to Keysight" on page 4
Table 6-3, "Items Not Included in the
"Contacting Keysight" on page
for instructions.
4.
85053B

Advertisement

Table of Contents
loading

Table of Contents