ABB IRB 760 Series Product Manual page 177

9
10
11
Product manual - IRB 760
3HAC039838-001 Revision: M
Action
Press the push buttons 1 to 6, one at a time,
to make sure that the buttons are moving
freely and do not stay in a locked position.
If the battery has been disconnected the revolu-
tion counter must be updated.
DANGER
Make sure all safety requirements are met
when performing the first test run. These are
further detailed in the section
may cause injury or damage on page
© Copyright 2011-2018 ABB. All rights reserved.
4.3.4 Replacing the brake release board
Note
Detailed in the Calibration chapter -
section Updating revolution counters
on page 356.
First test run
26.
4 Repair
Continued
177