ABB IRB 760 Series Product Manual page 58

2 Installation and commissioning
2.3.1 Lifting robot with fork lift
Continued
Lifting robot with fork lift
This section details how to secure the fork lift set to the robot in order to lift and
move the robot using the fork lift ONLY!
1
2
Continues on next page
58
Action
If a cooling fan for the axis 1 motor is used, it
must be removed in order to use the fork lift
device!
Position the robot as shown in the figure to the
right!
Fit the two adapters to the robot and secure.
© Copyright 2011-2018 ABB. All rights reserved.
Note
Release the brakes if required as de-
tailed in section Manually releasing the
brakes on page 67.
xx1000001093
Attachment points are shown in figure
Attachment points on robot on page
Attachment screws, 2 pcs, M16 x 90.
Tightening torque: 270 Nm.
Product manual - IRB 760
3HAC039838-001 Revision: M
56.