ABB IRB 760 Series Product Manual page 334

4 Repair
4.7.2 Replacing the gearbox, axes 2- 3
Continued
17
18
19
20
21
22
23
Continues on next page
334
Action
Remove the gearbox cover by removing its
attachment screws.
Remove two opposite screws of the attach-
ment screws that hold the gearbox and re-
place them with two guide pins.
Remove the remaining attachment screws.
Fit the lifting accessory to the gearbox.
CAUTION
The gearbox weighs 69 kg.
All lifting accessories used must be sized
accordingly!
If required, apply two screws, M12x100 to
the holes in the gearbox, in order to press
it free. (The screws need to have a full
thread.)
CAUTION
When the gearbox comes free from the
frame and comes off the guide pins it will
tilt and there is a risk of damage to the
gearbox surfaces! Be aware of this and re-
move the gearbox carefully!
© Copyright 2011-2018 ABB. All rights reserved.
Note
xx1000001400
Note
Always use guide pins in pairs!
Art. no. is specified in Required equipment
on page 329.
Product manual - IRB 760
3HAC039838-001 Revision: M