ABB IRB 760 Series Product Manual page 240

4 Repair
4.4.5 Replacing the linkage - lower link arm
Continued
5
6
7
Continues on next page
240
Action
Refit the support washers on the seal-
ing/spacer rings.
Check that the bearings in the lower link
arm are fitted correctly, that is in the center
of the hole. (The same distance from bear-
ing to the edge of the lower link arm on both
sides.)
CAUTION
The link weighs 23 kg.
All lifting accessories used must be sized
accordingly!
© Copyright 2011-2018 ABB. All rights reserved.
Note
Replace if damaged.
xx1000001259
Tip
Putting some grease on the support
washers will keep them in position.
Product manual - IRB 760
3HAC039838-001 Revision: M