4 Repair
4.5.2 Replacing the balancing weight
Continued
3
4
5
6
7
290
Action
Secure the balancing weight with round-
slings (using the lifting lugs) in an overhead
crane or similar.
Lift the balancing weight and put it in its
position on the parallel arm.
Put locking liquid (Loctite 243) on the attach-
ment screws.
Secure the balancing weight with its attach-
ment screws and washers.
DANGER
Make sure all safety requirements are met
when performing the first test run. These
are further detailed in the section
run may cause injury or damage on page
© Copyright 2011-2018 ABB. All rights reserved.
Note
xx1000001300
For art. no. see:
•
Required equipment
Attachment screws: M16x120 (2 pcs)
Tightening torque:
•
165 Nm.
xx1000001296
First test
26.
3HAC039838-001 Revision: M
Product manual - IRB 760