ABB IRB 760 Series Product Manual page 136

3 Maintenance
3.4.5 Replacing the SMB battery
Continued
Battery pack with a 3-pole battery contact (RMU)
xx1400002574
A
B
C
D
E
F
G
Required equipment
Equipment, etc.
Battery unit
Standard toolkit
Continues on next page
136
A
B C
Battery pack RMU
Holder for battery
SMB cover
Battery cable
Battry holder
Guide pin (2 pcs)
SMB unit
Note
There are two variants of SMB units and batteries. One with 2-pole battery contact
(DSQC) and one with 3-pole battery contact (RMU). The variant with the 3-pole
battery contact has longer lifetime for the battery.
It is important that the SMB unit uses the correct battery. Make sure to order the
correct spare parts. Do not exchange battery contacts!
Spare part no.
For spare part no.
see:
-
© Copyright 2011-2018 ABB. All rights reserved.
D E F G
Note
Battery includes protection circuits. Only re-
place with a specified spare part or an ABB-
• Spare parts approved equivalent.
on page 393
Content is defined in section
on page
Standard tools
389.
Product manual - IRB 760
3HAC039838-001 Revision: M