ABB IRB 760 Series Product Manual page 323

2
3
Product manual - IRB 760
3HAC039838-001 Revision: M
Action
Make sure the two o-rings on the circumfer-
ence of the gearbox are seated properly in
their respective groove. Lubricate them with
grease.
Make sure the small o-ring around the oil hole
is fitted properly!
© Copyright 2011-2018 ABB. All rights reserved.
4.7.1 Replacing the axis 1 gearbox
Note
Art no. is specified in Required equip-
ment on page 316.
xx1000001390
xx1000001392
Continues on next page
4 Repair
Continued
323