ABB IRB 760 Series Product Manual page 283

2
3
4
5
Product manual - IRB 760
3HAC039838-001 Revision: M
Action
Apply sealing compound on the surface for the
sealing ring.
Tip
Apply the sealing compund on the sealing rings.
Refit the inner sealing rings and support
washers in both ends.
Check that the bearings in the balancing device
are fitted correctly, that is in the center of the
hole. (The distance from the bearing to the edge
of the rod must be the same on both sides.)
CAUTION
The balancing device weighs 100 kg.
All lifting accessories used must be sized ac-
cordingly!
© Copyright 2011-2018 ABB. All rights reserved.
4.5.1 Replacing the balancing device
Note
xx1000001270
xx1000001116
Continues on next page
4 Repair
Continued
283