ABB IRB 760 Series Product Manual page 108

3 Maintenance
3.3.3 Inspecting, oil level gearbox axis 6
Continued
2
3
4
5
6
108
Action
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot working area.
Open oil plug, filling.
Required oil level: max. 2 mm below the oil plug
hole.
Add oil if required.
Refit oil plug, filling.
© Copyright 2011-2018 ABB. All rights reserved.
Note
Shown in figure Location of gear-
box on page 107.
Art. no. is specified in Required
equipment on page 107.
Further information about how to
fill the oil may be found in the
section Changing oil, gearbox axis
6 on page 133.
Tightening torque: 24 Nm.
Product manual - IRB 760
3HAC039838-001 Revision: M