ABB IRB 760 Series Product Manual page 308

4 Repair
4.6.2 Replacing motors, axes 2 and 3
Continued
18
19
308
Action
Recalibrate the robot!
DANGER
Make sure all safety requirements are met when
performing the first test run. These are further
detailed in the section First test run may cause
injury or damage on page
© Copyright 2011-2018 ABB. All rights reserved.
Note
Pendulum Calibration is described in
Operating manual - Calibration Pendu-
lum, enclosed with the calibration
tools.
Axis Calibration is described in
rating with Axis Calibration method on
page
General calibration information is in-
cluded in section
page
26.
360.
Calibration on
349.
Product manual - IRB 760
3HAC039838-001 Revision: M
Calib-