ABB IRB 760 Series Product Manual page 258

4 Repair
4.4.7 Replacing the parallel rod
Continued
6
7
8
9
Continues on next page
258
Action
Put the thrust washer (F) on the axis 2 side
of the parallel rod (C).
Put the cover washer (B) on the axis 3 side
of the parallel rod.
Refit the shaft (A) by pressing it through the
parallel bar with the fitting/removing tool.
Apply locking liquid in the hole of the lock
screw.
© Copyright 2011-2018 ABB. All rights reserved.
Note
xx0700000065
Parts:
A Shaft
B Cover washer
C Parallel rod
D Sealed spherical bearing
E Bearing grease
F Thrust washer
See figure above!
Art. no. is specified in Required equip-
ment on page 253.
See figure above!
Loctite 243
Product manual - IRB 760
3HAC039838-001 Revision: M