7
8
Product manual - IRB 760
3HAC039838-001 Revision: M
Action
Recalibrate the robot.
DANGER
Make sure all safety requirements are met
when performing the first test run. These are
further detailed in the section
may cause injury or damage on page
© Copyright 2011-2018 ABB. All rights reserved.
4.4.3 Replacing the upper arm
Note
Pendulum Calibration is described in
Operating manual - Calibration Pendulum,
enclosed with the calibration tools.
Axis Calibration is described in
ing with Axis Calibration method on
page
360.
General calibration information is included
in section
First test run
26.
4 Repair
Continued
Calibrat-
Calibration on page
349.
227