F
G
H
J
K
L
N
O
P
Required tools and equipment
Visual inspection, no tools are required.
Inspecting, labels
1
2
3
Product manual - IRB 760
3HAC039838-001 Revision: M
Combined warning label "Do not dismantle" and "Stored energy", 3HAC3981-1
Instruction label for lifting of robot, 3HAC039840-001
Warning label "Tip risk when loosening bolts", 3HAC9191-1
Instruction label "Before dismantling see product manual", 3HAC4591-1
Label, calibration, 3HAC024307-001
Warning label "Crush", 3HAC4517-1
Information labels at gearboxes and at robot base, specifying which oil is used
in gearboxes
ABB Logotype
Label for marking of axis 7, 3HAC028979-001 (option)
Action
DANGER
Turn off all:
•
electric power supply
•
hydraulic pressure supply
•
air pressure supply
to the robot, before entering the robot working area.
Inspect the labels, located as shown in the figures.
Replace any missing or damaged labels.
© Copyright 2011-2018 ABB. All rights reserved.
3 Maintenance
3.3.6 Inspecting the information labels
Note
Article numbers for the labels and
plate set is specified in
parts on page
393.
Continued
Spare
115