ABB IRB 760 Series Product Manual page 319

5
6
7
8
9
10
Product manual - IRB 760
3HAC039838-001 Revision: M
Action
Remove the complete arm system.
Unfasten the robot base from the foundation
by removing the base attachment screws.
Attach the lifting accessory, base and gear
1 and a roundsling, to the gearbox and
base.
CAUTION
The base and axis 1 gearbox weighs 130
kg + 200 kg.
All lifting accessories used must be sized
accordingly!
Lift the robot base including the axis 1
gearbox to allow the base and gear 1 sup-
port be fitted on each sides of the base.
Secure the support to the base and to the
foundation.
Make sure the base remains in a stable
position before performing any work under-
neath the base!
© Copyright 2011-2018 ABB. All rights reserved.
4.7.1 Replacing the axis 1 gearbox
Note
See Replacing the base, including axis 1
gearbox on page 178.
xx1000001395
Specified in Required equipment on
page 316.
Art. no. is specified in Required equip-
ment on page 316.
xx1000000364
A Support base (4 pcs)
Continues on next page
4 Repair
Continued
319