Complete Robot; Replacement Of Cable Unit, Axes 1-3 - ABB IRB 2400/L Product Manual

4 Repair

4.3.1 Replacement of cable unit, axes 1-3

4.3 Complete robot

4.3.1 Replacement of cable unit, axes 1-3
Location of cabling
The cable unit of axes 1-3 is run from the base of the robot to the motors, axes 1,
2 and 3, as shown in the figure below.
A more detailed view of the component and its position may be found in chapter
Spare parts and exploded views.
xx0500002541
A
B
C
D
E
F
Continues on next page
120
Connectors behind the cover plate at the robot base; R1.MP1-3 and R2.BU1-3.
At the serial measurement board; R2.G (battery), R2.FB1-3.
Connectors at motor 2; R3.MP2 and R3.FB2
Connectors at motor 3; R3.MP3, R3.FB3,R3.LS1 and R3.LS2
Connectors at motor 1; R3.MP1, R3.FB1
Upper bracket
Cable guide in the middle of the frame
© Copyright 2004-2018 ABB. All rights reserved.
Product manual - IRB 2400
3HAC022031-001 Revision: P