Fujitsu MB91150 Series Hardware Manual page 31

Table 1.5-1 Functions of the MB91150 pins (Continued)
Pin No. Pin name
76 PD7/ATG/INT15
78 PE0/OC0
79 PE1/OC1
80 PE2/OC2
81 PE3/OC3
82 PE4/OC4
83 PE5/OC5
84 PE6/OC6
85 PE7/OC7
86 PF0/IN0
87 PF1/IN1
88 PF2/IN2
89 PF3/IN3
90 PF4
91 PG0/PPG0
92 PG1/PPG1
93 PG2/PPG2
94 PG3/PPG3
95 PG4/PPG4
96 PG5/PPG5
99 PJ1/SDA
100 PJ0/SCL
102 PI5/SCK3/TO3
Circuit type
H External interrupt request input 15
This input is always in use while the corresponding
external interrupt is enabled. Stop port output in
advance unless the resulting processing is intentional.
[ATG] A/D converter external trigger input
This input is always in use while the corresponding
external interrupt is enabled. Stop port output in
advance unless the resulting processing is intentional.
Can be used as a port when the pin is not used for
external interrupt request input and A/D converter
external trigger input.
F Output compare output
Can be used as a port when output compare output
specification is disabled.
F Input capture input
Effective for input with input capture.
Can be used as a port when the pin is not used as
Input capture input.
F General-purpose I/O port
F PPG timer output
Effective when PPG timer output specification is
enabled.
Can be used as a port when PPG timer output
specification is disabled.
2
Q I C interface data I/O pin
Effective when I
Set port output to Hi-Z while the I
operating.
Can be used as a port when I
2
Q I C interface I/O pin
Effective when I
Set port output to Hi-Z while the I
operating.
Can be used as a port when I
P UART3 clock I/O, Reload Timer 3 output
Acts as output for Reload Timer 3 when UART3 clock
output is disabled and Reload Timer 3 output is
enabled.
Can be used as port when UART3 clock output and
reload timer output are disabled.
CHAPTER 1 OVERVIEW OF THE MB91150
Function description
2
C interface operation is enabled.
2
C interface is
2
C is not used.
2
C interface operation is enabled.
2
C interface is
2
C is not used.
15