SSANGYONG Y200
5. Install the differential carrier assembly into the axle
housing. Set up the bearing cap and then tighten
the cap bolts.
Installation Notice
Tightening Torque
Notice: Be careful not to change the caps. Be sure
to keep the original position of the caps.
YAD3D630
6. Measure the backlash of drive pinion and ring
gear.
Specified value
YAD3D640
7. Install the axle housing cover. Tighten the fixing
bolts.
Installation Notice
Tightening Torque
YAD3D650
REAR AXLE 3D-23
48 - 69 N•m
(35 - 51 lb-ft)
0.13 - 0.20 mm
39 - 46 N•m
(29 - 34 lb-ft)