SSANGYONG Y200
DIFFERENTIAL GEAR ASSEMBLY
Disassembly
1. Remove the drain plug and drain oil. Reinstall the
drain plug.
Installation Notice
Tightening Torque
YAD3D450
2. Remove the axle housing cover.
Notice: Clean the cover and housing contact
surface.
YAD3D460
3. Remove the bearing cap bolts and remove the
bearing cap. Pull out the differential carrier
assembly.
Notice: Do alignment marks on the bearing cap
not to change the caps before removal. When pulling
out, be careful to damage the axle housing.
YAD3D470
4. Disassemble the parts of differential carrier
assembly.
YAD3D480
REAR AXLE 3D-19
28 - 42 N•m
(21 - 31 lb-ft)