SSANGYONG Y200
MAINTENANCE AND REPAIR
YAD3A050
YAD3A060
YAD3A070
ON-VEHICLE SERVICE
FRONT AXLE SHAFT
Removal
1. Remove the tire.
2. with ABS (Only part time vehicle)
Remove the wheel speed sensor from the steering
knuckle and pull off the cable.
3. Remove the split pin from steering linkage link-
knuckle mounting and pull off the slot nut and
detach the link from knuckle arm.
Notice: Replace the split pin with new one when
it is installed again.
FRONT AXLE 3A-11