SSANGYONG Y200
REAR SUSPENSION ASSEMBLY
Removal Procedure
1. Support the rear axle housing bottom safely using
the jack and fix the front wheel as shown.
YAD2D080
2. Remove the mounting nut of the lower link
connected the stabilizer bar and separate the
stabilizer bar.
YAD2D090
3. Remove the mounting cap bolt retaining both end
of the stabilizer bar and remove the stabilizer bar,
the mounting cap and the bushing.
YAD2D100
4. Remove the upper mounting nut of the link with
the stabilizer bar removed and remove the link.
YAD2D110
REAR SUSPENSION 2D-9