Document Revision History - Altera Cyclone IV Device Handbook

11–4
In some applications, it is necessary for a device to wake up very quickly to begin
operation. Cyclone IV devices offer the Fast-On feature to support fast wake-up time
applications. The MSEL pin settings determine the POR time (t
f
For more information about the MSEL pin settings, refer to the
Remote System Upgrades in Cyclone IV Devices
f
For more information about the POR specifications, refer to the
Datasheet

Document Revision History

Table 11–3
Table 11–3. Document Revision History
Date Version
May 2013 1.3
July 2010 1.2
February 2010 1.1
November 2009 1.0
Cyclone IV Device Handbook,
Volume 1
chapter.
lists the revision history for this chapter.
Updated Note (4) in Table
Updated for the Quartus II software version 10.0 release.
■
Updated "I/O Pins Remain Tri-stated During Power-Up" section.
■
Updated Table 11–1.
■
Updated Table 11–1 and Table 11–2 for the Quartus II software version 9.1 SP1
release.
Initial release.
Chapter 11: Power Requirements for Cyclone IV Devices
chapter.
Changes
11–1.
Document Revision History
) of the device.
POR
Configuration and
Cyclone IV Device
May 2013 Altera Corporation