Adding Custom Host Group Client Configurations; Deleting Custom Host Group Client Configurations - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
hostname
subnetmask
default-route 192.168.0.33
no broadcast
no domain
no dns-server
no static-route
no nis server
no nis domain
!
!
!
!
!
If no custom configurations have been configured for the host group client, add custom configurations as needed.
For more information, refer to
Section 5.15.12.2

Adding Custom Host Group Client Configurations

To add a custom configuration to a host group client on the DHCP server, do the following:
1. Make sure the CLI is in Configuration mode.
2. Add the custom configuration by typing:
services dhcpserver host-groups host options client custom number value
Where:
• host is the name of the host group
• number is the number assigned to the host group
• value is the value of the custom option
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.15.12.3

Deleting Custom Host Group Client Configurations

To delete a custom configuration for a host group client on the DHCP server, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the custom configuration by typing:
no services dhcpserver host-groups host options client custom number value
Where:
• host is the name of the host group
• number is the number assigned to the host group
• value is the value of the custom option
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Adding Custom Host Group Client Configurations
SUB3
255.255.255.224
Section 5.15.10.2, "Adding Custom Host Client
Setup and Configuration
Configurations".
Chapter 5
257