Viewing The Slot Hardware; Viewing Module Information - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
• Section 3.2.4, "Viewing CPU/RAM Utilization"
• Section 3.2.5, "Viewing the Slot Status"
• Section 3.2.6, "Viewing the Slot Sensor Status"
• Section 3.2.7, "Viewing the Power Controller Status"
Section 3.2.1

Viewing the Slot Hardware

To view a list of the hardware installed in each slot, type:
show chassis hardware slot-hardware
A table or list similar to the following example appears:
ruggedcom# show chassis hardware slot-hardware | tab
ORDER
SLOT FIELD
--------------------------------------------------------------------------------
pm1 HI
lm1 CG01
lm2 XX
lm3 S01
lm4 XX
lm5 XX
lm6 XX
main RX1501-L3
This table or list provides the following information:
Parameter
slot
order-field
detected-module
serial-number
Section 3.2.2

Viewing Module Information

To view information about the modules installed in the device, type:
show chassis info slot-info
A table or list similar to the following example appears:
ruggedcom# show chassis info slot-info | tab
SLOT DETECTED MODULE
Viewing the Slot Hardware
DETECTED MODULE
88-300 VDC or 85-264VAC, screw terminal block
1000TX w/ 2x RJ45
none
6x RS232/RS422/RS485 via RJ45
none
none
none
RX1501 8 Gigabit Layer 3 w/ 6 LM slots and 1 PM slots
Description
Synopsis: { ---, pm1, pm2, main, sm, lm1, lm2, lm3, lm4, lm5, lm6, swport, eth, serport,
celport, cm, em, trnk }
The slot name, as marked on the silkscreen across the top of the chassis.
Synopsis: A string 1 to 25 characters long
The order code of the chassis as derived from the current hardware configuration.
Synopsis: A string 1 to 60 characters long
The installed module's type specifier.
Synopsis: A string 1 to 64 characters long
The installed module's unique serial number.
SERIAL N
P15R-071
L15R-081
none
L15R-081
none
none
none
49110102
BootLoader FPGA
Chapter 3
Device Management
51