Adding A Prefix List Distribution Path; Deleting A Prefix List Distribution Path; Managing Key Chains And Keys - Siemens RUGGEDCOM ROX II User Manual

Chapter 5
Setup and Configuration
Section 5.20.8.2

Adding a Prefix List Distribution Path

To add a prefix list distribution path for dynamic RIP routes, do the following:
1. Make sure the CLI is in Configuration mode.
2. Add the path by typing:
routing rip distribute-prefix-list direction interface
Where:
• direction is the direction (incoming or outgoing) in which to filter routing updates.
• interface is the name of the interface. This parameter is optional.
3. Configure the following parameter(s) as required:
Parameter
prefix-list { prefix-list }
4. If necessary, configure an event tracker to track network commands. For more information, refer to
Section 5.20.4.2, "Tracking
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
5.
Section 5.20.8.3

Deleting a Prefix List Distribution Path

To delete a prefix list distribution path for dynamic RIP routes, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the path by typing:
no routing rip distribute-prefix-list direction interface
Where:
• direction is the direction (incoming or outgoing) in which to filter routing updates.
• interface is the name of the interface. This parameter is optional.
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 5.20.9

Managing Key Chains and Keys

Key chains are collections of keys (or shared secrets), which are used to authenticate communications over a
dynamic RIP network. Only routers with the same key are able to send and receive advertisements.
Multiple key chains can be configured for different groups of interfaces and the lifetime for each key within a chain
can be separately configured.
The following sections describe how to configure and manage key chains and keys:
• Section 5.20.9.1, "Viewing a List of Key Chains"
• Section 5.20.9.2, "Viewing a List of Keys"
350
Commands".
Description
The name of the prefix list.
Adding a Prefix List Distribution Path
RUGGEDCOM ROX II
CLI User Guide