Managing Netconf; Enabling And Configuring Netconf Sessions - Siemens RUGGEDCOM ROX II User Manual

Chapter 5
Setup and Configuration
used 0
free 0
bgp
total 0
used 0
free 0
This list provides the following information:
Parameter
total
used
free
Section 5.10

Managing NETCONF

The Network Configuration Protocol (NETCONF) is a network configuration protocol developed by the Internet
Engineering Task Force (IETF). NETCONF provides functions to download, upload, change, and delete the
configuration data on network devices. RUGGEDCOM ROX II devices also support the ability to collect data and
perform direct actions on the device, such as rebooting the device, clearing statistics, and restarting services.
NOTE
For more information about NETCONF and its use, refer to the RUGGEDCOM ROX II NETCONF
Reference Guide.
The following sections describe how to configure and manage NETCONF:
• Section 5.10.1, "Enabling and Configuring NETCONF Sessions"
• Section 5.10.2, "Viewing NETCONF Statistics"
Section 5.10.1

Enabling and Configuring NETCONF Sessions

To enable and configure NETCONF sessions, do the following:
1. Make sure the CLI is in Configuration mode.
CAUTION!
Security hazard – risk of unauthorized access/exploitation. Configure an idle timeout period for
NETCONF to prevent unauthorized access (e.g. a user leaves their station unprotected) or denial
of access (e.g. a guest user blocks an admin user by opening the maximum number of NETCONF
sessions).
IMPORTANT!
Before configuring an idle timeout on a device managed by RUGGEDCOM NMS, make sure NMS
is configured to support a timeout period for NETCONF sessions.
2. Navigate to admin » netconf and configure the following parameter(s) as required:
200
Description
The total heap allocated (in bytes).
The number of used ordinary blocks (in bytes).
The number of free ordinary blocks (in bytes).
RUGGEDCOM ROX II
CLI User Guide
Managing NETCONF