Adding A Public Key; Adding An Ipsec-Formatted Public Key - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
If no public keys have been configured, add keys as needed. For more information, refer to
"Adding a Public Key".
Section 4.7.3.2

Adding a Public Key

To add an unsigned public key, do the following:
NOTE
Do not associate the public key with the private key if the public key belongs to another device.
1. Make sure the private key associated with the public key has been added. For more information, refer to
Section 4.7.2.2, "Adding a Private
2. Enable auto-wizard by typing:
autowizard true
3. Make sure the CLI is in Configuration mode.
4. Add the public key by typing:
security crypto public-key name
Where:
• name is the name of the public key
5. Configure the following parameter(s) as required:
NOTE
Before inserting the contents of the key, enter multi-line mode by pressing Esc+m. Press Ctrl+d to
exit multi-line mode after the key has been added.
Parameter
algorithm { algorithm }
contents { contents }
private-key-name { private-key-name }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
6.
Section 4.7.3.3

Adding an IPSec-Formatted Public Key

IPSec-formatted public keys from systems that do not support the Privacy-Enhanced Mail (PEM) format, such as
RUGGEDCOM ROX devices, can be imported into RUGGEDCOM ROX II and automatically converted.
Once added to the RUGGEDCOM ROX II database, the IPSec-formatted public key is visible via the System
Public Key form under tunnel » ipsec » connection » {name} » {end}, where {name} is the name of the
Adding a Public Key
Key".
Description
Synopsis: { rsa, dsa }
The algorithm of the key.
Synopsis: A string 1 to 8192 characters long
The contents of the key.
The private key name associated with this public key.
Chapter 4
System Administration
Section 4.7.3.2,
171