Table of Contents
Advertisement
RUGGEDCOM ROX II
CLI User Guide
4.
Configure the CA certificate and key for RUGGEDCOM CROSSBOW by typing:
apps CrossBow certificate cert certificate cert-private-key key
Where:
• certificate is the name of the CA certificate loaded on the device
• key is the name of the private key loaded on the device
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
5.
Section 5.42.5
Managing CROSSBOW CA Certificate Lists
The following sections describe how to manage CA certificate lists for the RUGGEDCOM CROSSBOW
application:
•
Section 5.42.5.1, "Viewing a List of RUGGEDCOM CROSSBOW Certificate Lists"
•
Section 5.42.5.2, "Adding a CA Certificate List"
•
Section 5.42.5.3, "Deleting a CA Certificate List"
Section 5.42.5.1
Viewing a List of RUGGEDCOM CROSSBOW Certificate Lists
To view a list of CA certificate lists configured for the RUGGEDCOM CROSSBOW application, type:
show running-config apps crossbow certificate ca-cert-list
If CA certificate lists have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config apps crossbow certificate ca-cert-list
apps crossbow certificate ca-cert-list Crossbow_CA
!
If no CA certificate lists have been configured, add lists as needed. For more information, refer to
Section 5.42.5.2, "Adding a CA Certificate
Section 5.42.5.2
Adding a CA Certificate List
To add a CA certificate list for the RUGGEDCOM CROSSBOW application, do the following:
1.
Make sure the required CA (Certified Authority) certificate has been added to the device. For more
information, refer to
2.
Make sure the CLI is in Configuration mode.
3.
Add the certificate list by typing:
apps crossbow certificate ca-cert-list name
Where:
• name is the name of the CA (Certified Authority) certificate.
Managing CROSSBOW CA Certificate Lists
List".
Section 4.7.1.3, "Adding a CA Certificate and CRL"
Chapter 5
Setup and Configuration
615
Advertisement
Table of Contents
Troubleshooting
