Deleting An Ip Pool - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
• name is the name of the subnet
• description is the name of the IP pool
3. Configure the leased time settings by configuring the following parameter(s):
Parameter
default { default }
maximum { maximum }
4. Configure the client and failover settings by configuring the following parameter(s):
Parameter
default { default }
maximum { maximum }
5. Add one or more IP ranges for the pool. For more information, refer to
Range to an IP
6. Add one or more Option82 classes to the pool. For more information, refer to
Option 82 Class to an IP
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
7.
Section 5.15.13.3

Deleting an IP Pool

To delete an IP pool, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the pool by typing:
no services dhcpserver subnet name options ippool description
Where:
• name is the name of the subnet
• description is the name of the IP pool
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Deleting an IP Pool
Pool".
Pool".
Description
Default: 600
The minimum leased time in seconds that the server offers to the
client.
Default: 7200
The maximum leased time in seconds that the server offers to the
clients.
Description
Default: 600
The minimum leased time in seconds that the server offers to the
client.
Default: 7200
The maximum leased time in seconds that the server offers to the
clients.
Section 5.15.15.2, "Adding an IP
Section 5.15.16.2, "Adding an
Chapter 5
Setup and Configuration
259