Preface; Conventions; Alerts; Cli Command Syntax - Siemens RUGGEDCOM ROX II User Manual

Hide thumbs Also See for RUGGEDCOM ROX II:

Table of Contents

RUGGEDCOM ROX II

CLI User Guide

Preface

This guide describes the CLI user interface for RUGGEDCOM ROX II v2.9 running on the RUGGEDCOM

RX1500/RX1501/RX1510/RX1511/RX1512. It contains instructions and guidelines on how to use the software, as

well as some general theory.

It is intended for use by network technical support personnel who are familiar with the operation of networks. It is

also recommended for use by network and system planners, system programmers, and line technicians.

This CLI User Guide uses the following conventions to present information clearly and effectively.

The following types of alerts are used when necessary to highlight important information.

DANGER alerts describe imminently hazardous situations that, if not avoided, will result in death or

serious injury.

WARNING alerts describe hazardous situations that, if not avoided, may result in serious injury and/or

equipment damage.

CAUTION alerts describe hazardous situations that, if not avoided, may result in equipment damage.

IMPORTANT alerts provide important information that should be known before performing a procedure

or step, or using a feature.

NOTE alerts provide additional information, such as facts, tips and details.

The syntax of commands used in a Command Line Interface (CLI) is described according to the following

conventions:

Rx1500 Rx1512 Rx1501 Rx1510 Rx1511