Deleting A Private Key; Managing Public Keys; Viewing A List Of Public Keys - Siemens RUGGEDCOM ROX II User Manual

Chapter 4
System Administration
Parameter
contents { contents }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
5.
Section 4.7.2.3

Deleting a Private Key

To delete an unsigned private key, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the private key by typing:
no security crypto private-key key name
Where:
• name is the name of the private key
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 4.7.3

Managing Public Keys

The following sections describe how to configure and manage unsigned public keys on the device:
• Section 4.7.3.1, "Viewing a List of Public Keys"
• Section 4.7.3.2, "Adding a Public Key"
• Section 4.7.3.3, "Adding an IPSec-Formatted Public Key"
• Section 4.7.3.4, "Deleting a Public Key"
Section 4.7.3.1

Viewing a List of Public Keys

To view a list of unsigned public keys, type:
show running-config security crypto public-key
If public keys have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config security crypto public-key
security
crypto
public-key ipsec-generated
algorithm
contents
private-key-name ipsec-generated
!
!
!
170
rsa
"{--contents--}"
Description
Synopsis: A string
The contents of the unsigned private key.
RUGGEDCOM ROX II
CLI User Guide
Deleting a Private Key