Scheduling Jobs; Viewing A List Of Scheduled Jobs; Adding Scheduled Jobs - Siemens RUGGEDCOM ROX II User Manual

Chapter 4
System Administration
Section 4.11

Scheduling Jobs

The RUGGEDCOM ROX II scheduler allows users to create jobs that execute command line interface (CLI)
commands at a specific date and time, or in response to specific configuration changes. Typical applications
include scheduling the regular clearing of system logs, or performing periodic file transfers to remote servers.
There are two types of scheduled jobs:
• Periodic jobs are executed at a specified date and time.
• Config change jobs are executed only when a specific.
The following sections describe how to configure and manage scheduled jobs:
• Section 4.11.1, "Viewing a List of Scheduled Jobs"
• Section 4.11.2, "Adding Scheduled Jobs"
• Section 4.11.3, "Deleting a Scheduled Job"
Section 4.11.1

Viewing a List of Scheduled Jobs

To view a list of scheduled jobs, type:
show running-config admin scheduler
If jobs have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config admin scheduler | tab
admin
scheduler
scheduled-jobs
SCHEDULER JOB
NAME
----------------------------------------------------------------------------------
Backup
Clear Message Log
If no jobs have been configured, add jobs as needed. For more information, refer to
Scheduled Jobs".
Section 4.11.2

Adding Scheduled Jobs

To add a scheduled job, do the following:
1. Make sure the CLI is in Configuration mode.
2. Configure the following parameter(s) as required:
Parameter
{ scheduler-job-name }
188
JOB JOB
JOB TYPE MINUTE HOUR
periodic 1 -
periodic 5 5:00
Description
Synopsis: A string 1 to 64 characters long
The name of the scheduled job. The name can be up to 64 characters in length.
JOB JOB
DAY JOB DAY
MONTH MONTH WEEK
- - Monday
1 1 Monday
JOB COMMAND
backupconfig
clearmessagelog
Section 4.11.2, "Adding
RUGGEDCOM ROX II
CLI User Guide
Scheduling Jobs