Viewing The Memory Statistics - Siemens RUGGEDCOM ROX II User Manual

RUGGEDCOM ROX II
CLI User Guide
-----------------------------------------------------------
fe80::/64
fe80::/64
fe80::/64
fe80::/64
fe80::/64
fe80::/64
ff00::/8
ff00::/8
ff00::/8
ff00::/8
ff00::/8
ff00::/8
This table/list provides the following information:
Parameter
destination
gateway
interface
type
weight
metric
If no IPv6 routes have been configured, add routes as needed. For more information, refer to
"Adding an IPv6 Static
Section 5.9

Viewing the Memory Statistics

To view statistics related to the Core, RIP, OSPF and BGP daemons, type:
show routing status memory
A list similar to the following example appears:
ruggedcom# show routing status memory
routing status memory
zebra
total 405504
used 359424
free 46080
rip
total 0
used 0
free 0
ospf
total 0
Viewing the Memory Statistics
switch kernel
dp1 kernel
vrf_lo kernel
switch.0001 kernel
fe-cm-1 kernel
switch.4094 kernel
switch
dp1
vrf_lo
switch.0001
fe-cm-1
switch.4094
Description
Synopsis: A string
The network/prefix.
Synopsis: A string
The gateway address.
Synopsis: A string
The interface name.
Synopsis: A string
The route type.
Synopsis: A string
The route weight.
Synopsis: A string
The metric value.
Route".
256
256
256
256
256
256
256
256
256
256
256
256
Chapter 5
Setup and Configuration
Section 5.23.3,
199